Portable House

Portable House Product DescriptionKML Prefab Systems To fulfill the assorted requirements of our clients in the best possible and trusted manner we are passionately engaged in offering a wide range of good price Portable House.Details:Main Shell:The main fabrication of the structural frame work shall be integral & all welded type to comprise of the bottom frame, overall frame work, internal, external cladding with insulation and other peripherals. Sloping self-draining roof and desired door-window, A/C openings etcBase Frame:The main bottom (Base) frame is fabricated and welded M S pressed steel channel sections/rolled steel channel sections, and all the inter connecting cross members shall also be of steel channels duly welded lengthwise & breadth wise and conveniently equispacedFlooring:Thick Cement bonded Particle Board, shall be fixed with suitable fasteners to the bottom frameSide And End Walls:The exterior cladding of the shell shall be of M S Pressed steel vertical corrugated sheets of 1.2mm & shall be welded to the bottom M S Channel frame, corner posts, top frame & roof frame. The corrugated version acts as stiffeners and increase strength to weight ratio & eliminates the use of any other vertical supports. All the gaps are sealed at the edgesRoof:The roof shall be of sloping type from the center towards the walls for efficient drain of rainwater and to avoid collection of dust leaves etc. The roof shall be made of 1.2 mm thick plain MS. Steel sheets and is provided with adequately reinforced sections from inside for additional strength and this shall be able to comfortably resist loadsWeather Shed:All door and windows & Air-conditioner openings shall be provided with weather shed of suitable sizeInsulation:50 MM Thick mineral glass wool/ Fiberglass resin bonded wool shall be provided on all sidewalls, end walls, roof with special adhesivesDoors:The shutter shall be opened from out side. The main door shall be made from G I Sheet sections fully insulated of 30mm thickness for eliminating heat transmission and shock. These doors shall be fixed with heavy gauge M. S hinges & Hydraulic doors closerWindows:Windows shall be made from quality Aluminum anodized extruded section of suitable size and shall be of sliding type fitted with clear glasses. Mosquito nets shall be provided on suitable framework & anti pilferage MS grills shall also be providedPretreatment And Painting:The surface preparation for all steel surfaces shall be pre treated with anti corrosive chemicals including de-greasing and de-rusting and phosphating and these shall be additionally coated with red-oxide. The external surface of the Bunk Houses shall be finally painted with two coats of epoxy paint