Automatic jumper Pre Forming Machines

AUTOMATIC JUMPER-LiNK/WIRE FORMING MACHINE This is an automatic jumper-linklwire-forming machine capable of forming a right angle cut-and bend jumper-link and other wire forms with a pitchJlength size control spanning from 2mm to 40mm. (Other size range on request). The bare tinned-copper -wirelwire is de-reeled from the spool using a special de-reeling device and then fed to the wire straightner. The wire is straightened in two planes and then passed through the feed unit. The feed unit meters the wire length as per the jumperlwire/size set on the feed unit. The wire is then conveyed to the cut & form die-module, which operates as soon as the desired length of wire has been fed to it. The machine is capable of forming 3500 jumper links/formed wire per hour. Change-over from one size to the other takes just two minutes. The universal tool-set caters to the entire range of pitch size from 2 to 25mm. The bend angle can be varied from 100 to 90 through adjustment of tools. The machine exercises a very tight tolerance of:!: 0.5% on the length of one of the bent legs/total lenght. Features Power :100 watts , 220 AC Drive:AC Induction/synchronous motor. Weight:25 Kg. Dimensions (L x W x H):(300 x 450 x 300) mm Wire Size:Handles wires from 0.6 to 0.9mm Dia. Pitch Size:Adjustable from 4mm to 25mm/wire size2-40 mm Cut to bend length :4.5mm (others on request) for Jumper Pitch tolerance :� 0.5 mm Cut-to-bendnength tolerance(One lead Only) Production :� 0.5 mm Rate :3,500 Jumpers/HrPro. (Or 5,000 Jumper/ Additional Information Delivery Time 4-6 Production Capacity 3/500 Jumpers/HrPro. (Or 5/000 Jumper/ Packaging Details cartoon packing