0.1-2 A Programmable Logic Controllers PLC

EC48 is a cost-effective programmable temperature controller. It accepts J-type (Iron/Constantan) and K-type (Chromel/Alumel) thermocouples as well as Pt100 RTD inputs. A large LED dual-display on the front of the process controller shows the difference in values of the setpoint and process value while 2 additional LEDs indicate the status of each of the two relays. Buttons on the front of EC48 allow operators to easily program up to 2 setpoints for the process value. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy. Typically, readings have a maximum error of plusmn; 1 deg;C. The controller has 2 electromagnetic relays that trigger heating or cooling. EC48 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. This product features Radix''s proprietary sensor-break indication technology.Features: J, K thermocouples and Pt100 RTD inputsUp to 2 setpointsAccuracy: ± 0.1% of full scale, typically ±1 °CON-OFF and Time Proportional Control85 - 265 V AC SMPS power supplySensor break indication