Model Name/Number: FFP-01 Foam Fluxer & Preheater, Semi-Automatic

Foam-Fluxer & Preheating Unit This piece of equipment is used for fluxing and activating the fluxed PCB Assembly and preparing it for the soldering opertion.lt incorporates the following stages: FORM-FlUXER; This generates a stable wave of foam (microscopic bubbles of flux) when air* is diffused and forced through the liquid-flux by a special device. The PCB assembly is passed over the foam-wave and the flux is applied on the lower side of the PCB. AlR-KINFE : This is used to level off the flux applied by the foam -fluxer and blows off excess solvent from the flux on the PCB. PRE-HEATER: This is used to activate the flux and bring the whole PCB assembly to a uniform temperature (around 90-100�C) to avoid thermal shock/stress when the assembly undergoes the solgering operation (control by Digital Temperature controler). TRANSPORTATION: The PCB is conveyed through the above stages on a PCB carrier (2 Nos. Supplied with the equipment) moving on a pair of conveyor rail (manual movement). The carrier can then be transfered to the soldering station without removing the PCB form it. Additional Information Delivery Time 3days Production Capacity 200/hr Packaging Details cartoon box packing