Sika App Bituminous Waterproofing Membrane, For Plain Surface, Coverage: 10 Meters

This type of membrane is manufactured by modifying premium grade asphalts with atactic poly propylene and specially reinforced with non-woven polyester. This type of membrane show excellent strength, elasticity and durability. Usage: It is used as waterproofing/dam proofing membrane for protection of various substrates in wide range of applications Medium to large roof slabs (domestic, commercial and industrial) Basements and raft slabs, exposed roofs Underground car parks, etc. Bridges & Underpass Application Method/Tools: Application procedure may vary slightly depending upon site conditions However given below are general guidelines Apply bituminous primer to a clean, smooth and dry surface by brush, roller or spray Unroll and align and re roll correctly before torching Use gas burner to heat the substrate and thermo fusible film on the underside on lower face of membrane When the thermo- fusible film melts after torching, the membrane is ready to stick Roll forward and press firmly against the substrate to bond Heat both the overlaps and use the round tipped trowel heating the same to smoothen and press into seam All angles and abutments should be sealed with extra care to ensure full bondage The edges should be sealed well into the grooves Value Base: All technical data stated in this Product Data Sheet are based on laboratory tests Actual measured data may vary due to circumstances beyond our control Health and Safety Information: For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.