Rotameter with Transmitter

Origin of Metal Tube Rotameter It operates on the principle of variable area; the fluid in the metal tube raised a float in the taper tube increasing the area of passage of fluid. The float moves up in proportion to the rate of flow of fluid and get stabilized when the weight of the float is balanced by the upward hydraulic force. By a magnetic coupling the inner float movement through a series of linkages and counter weight. The tube and the float combination determine the flow rate. The inner float magnetic field is detected by the high sensitive magnetic field detection sensor, enable us to show the digital readout.As such this flow meter does not require any electrical connection, since it operates on battery. It has an inbuilt two wire transmitter provide 24 VDC and take 4 - 20 mA signal. Benefits of Digital Variable Area Flow Meters : Local Indication without the need for auxiliary power Minimum Pressure loss. Easy to read Accurate measurement even at higher flow (150 m 3 / hr) Suitable for low flow (8 LPH)s Default inbuilt transmitter of 4-20 mA (Loop Powered) No movement assembly reducing the maintenance Technical Specification : Accuracy +/- 1.5% of FSR. Range ability 10:1 Repeatability +/- 0.25% of FSR Temperature Rating -50 to 120 °C. Pressure Rating 80 kg/cm2 Flow Direction Bottom to Top End connection Flanged to suit customer’s requirement. Wetted Part To suitable specific liquid or gases. Mounting position Vertical. Indication Digital flow rate Transmission 2 wire loop powered Enclosure Flameproof / Weatherproof. Power supply 9 VDC Battery Maximum Flow And Pressure Loss LINE SIZE 20oC WATER FLOW 0oC 1 atm AIR FLOW APPROX PRESSURE LOSS NB m3/hr Nm3/hr L MM WC 15 0.2 - 1.2 6 - 35 200 - 225 20 0.4 - 2.0 8 - 60 220 - 230 25 1-5 30 - 150 200 - 270 40 2.5 - 10 70 - 300 200 - 250