Mitsubishi Melservo JE Series Servo Amplifier, Model Name/Number: MR-JE-10B

Note: Rated output and speed of a servo motor are applicable when the servo amplifier, combined with the servo motor, is operated within the specified power supply voltage and frequency.Select the most suitable regenerative option for your system with our capacity selection software.Refer to Regenerative Option for the tolerable regenerative power [W] when regenerative option is used.When using the built-in dynamic brake, refer to MR-JE-_B Servo Amplifier Instruction Manual for the permissible load to motor inertia ratio.When the servo amplifiers are closely mounted, keep the ambient temperature within 0 to 45 deg C, or use them with 75% or less of the effective load ratio.The command communication cycle depends on the controller specifications and the number of axes connected.This value is applicable when a 3-phase power supply is used.When an alarm occurs on MR-JE-B servo amplifier, the hot line forced stop signal will be sent to other servo amplifiers through a controller, and all the servo motors that are operated normally by MR-JE-B servo amplifiers decelerate to a stop.