RCS3 Servo Press Compatible ROBO Cylinder with Load Cell

We have different types of ROD type Robo Cylinder RCP5 / RCP6 Series Robo Cylinder and RCS2 / RCS3 Series Robo Cylinder (with Built in load cell unit).We have Cost Effective Stepper base ROD Robo Cylinder with built in Batteryless Absolute Encoder for Pressing application, available Push Force up to 600 Kg (6000 N) if Pressing force requirement is more than 600 Kg/ 6000 N then we have Servo Cylinder / Servo Press Solution up to 5t (50,000 N).Push-motion operation is the function of keeping the rod and slider pushed to the work, etc. Servo press provides superior stop stability during pressing, which makes them optimal for push-motion operation. Also, servo press can be used in a wide variety of applications because they can be used in work operations that require strong push force, such as press fitting and riveting work.A function that can perform high-precision push control output using the feedback data from the dedicated load cell installed in the actuator.By attaching a dedicated load cell to the rod tip, the actual load applied to the press target can be detected. This allows for high-precision load control with a loading repeatability of ±0.5% F.S. (full scale)Connectivity with External EquipmentIt's possible to perform analog output of load data (4-20mA). By using a display panel manufactured by a third party, it is possible to display 2D graphs of the displacement vs. load cell output and judge them. Also, connecting a pulse counter allows you to check the feedback pulses.Load Cell Servo Press Programming Feature is Available in ROBO Cylinder® SoftwareWith the Press Programming feature in the RC software, one of two control methods, "Speed Control" or "Force Control", can be selected. In addition, one of four stop conditions, "Position", "Distance", "Load", or "Incremental Load", can be selected as the method for stopping. By utilizing a total of eight types of press methods, it is possible to handle a variety of press operations.