Liquid Sika Separol Oil Based Shutter Release Agent, For Industrial

MOULD RELEASE AGENT DESCRIPTION Ready to use low viscous mineral oil based mould release agent. Ready to use and easy to apply. USES Sika® Separol Plus can be used on moulds to obtain clean and smooth concrete surface and it's use facilitates fast and easy removal and cleaning of: ▪ Steel formwork ▪ Plastic formwork ▪ Timber formwork ▪ Aluminium formwork ▪ Heated formwork CHARACTERISTICS / ADVANTAGES Sika® Separol Plus when used, provides following beneficial properties: ▪ Forms stable thin film when dried up ▪ No dirt sticks on surface after it is dried ▪ Clean, fast and easy stripping of formwork ▪ Extended life of formwork Improved finish stain and air-hole free fair-faced concrete ▪ ▪ Reduced concrete contamination ▪ High coverage ▪ Does not corrode steel ▪ Environment friendly product PRODUCT INFORMATION Chemical Base Blend of mineral/ Natural oils Packaging 230 litres Drums Appearance / Colour Brownish oily liquid Shelf Life 12 months from date of production if stored properly in original unopened, undamaged, sealed packaging. Storage Conditions Protect from frost, direct sunlight and contamination. Opened units should be stored closed. Density ~0.83 kg/l at 25°C APPLICATION INFORMATION Consumption Steel, Aluminium or Plastic formwork 40-60 m2/l and Timber form 30 m2/l. The consumption is dependant on the surface texture and porosity of the formwork. Actual dosage to be finalised on the basis of site trials.