ABB ACS1000 MV Drives

We are offeringABB ACS1000 MV Drives to our clients.Other DetailsInput and Output of Drive Inverter Type Inverter with fast-switching power semiconductors - Integrated Gate Commutated Thyristors (IGCTs), without parallel or series connected devicesInput Voltage Any medium voltage level, 50 Hz or 60 Hz, can be applied to the appropriate primary side of the converter input transformer.Variation (ACS 1000, ACS 1000i) -5% / +10% of nominal voltage, down to -25% safe operation with derated output. Higher variation on request.Auxiliary voltage 400 VAC +-10%, 50/60 Hz480 VAC +-10%, 60 Hz575 VAC +-10%, 60 Hz, 3 phaseUPS (Uninterruptible Power Supply) If available, a UPS can be connected for control power supply, 110 - 240 VAC +-10%, single phase. Alternatively, the drive can be equipped with backup batteries.Standard Protection Functions Auxiliary voltage fault, cabinet temperature supervision, overcurrent, short circuit detection, earth fault, input phase loss, output phase loss, overvoltage, motor overload, the motor under load, motor stall and over speed protection, communication fault, main circuit breaker supervision and many othersExtensive range of additional I/O features available Motor supervision I/Os Fault/alarm overtemperature, a vibration of bearings, PT 100 winding and bearing temperaturesTransformer supervision I/Os Fault/alarm overtemperature, Buchholz, PT 100 winding temperaturesHardwired signals for remote drive control References start/stop, speed/torque, etc, Status feedback signals ready/running, Analog signals current/voltage/power, etc.Redundant cooling fan (air-cooled and water-cooled ACS 1000) and pump (water-cooled ACS 1000) for enhanced reliabilityBraking chopper for effective motor braking and short deceleration timesBi-directional bypass (start-up bypass for synchronous transfer of up to 4 motors to the line and taking back machine from line to VSD operation)ABB DriveWindow software tool for service and diagnosticsABB DriveMonitorTM for remote monitoring and diagnosticsControl interface (optional) All common field buses including Profibus, Modbus, Allen-Bradley DeviceNet, Ethernet, ABB Advant Fieldbus AF100 (others on request)Additional Features Retrofit-ready for existing motors and suitable for most medium voltage applicationsFuseless design for reliable, non-aging, maintenance-free circuit protectionDTC control platform for exceptionally high torque and speed control performanceIntegrated or separate input transformer for highest system design flexibilityOutput sine filter for pure sinusoidal voltage and current outputCompatibility with standard induction motors without deratingACS100 Drives can be equipped with a 12- or 24-pulse diode rectifier which meets the stringent requirements for current and voltage harmonic distortion as defined by IEEE, IEC, and ENThe converter design does not require any medium voltage power fuses, instead of using dedicated IGCT (Integrated Gate Commutated Thyristor) providing better protection of power componentsAdvanced, environmentally friendly, rapeseed oil-filled foil capacitors, designed for a long lifetime are usedWater cooling cabinet with heat exchangers and deionization unit come in ACS100 Water Cooled DrivesDriveMonitor provides monitoring access to the drive even from remote locations