ABB ACS5000 MV Drives
Price on request
Specification
- ip20
- IP21
- input
- Medium voltage input transformer for 36-pulse diode rectifier
- model name
- ACS5000 Medium Voltage Drives
- power range
- 1.5 MW to 36 MW
- availability
- In Stock
- inverter type
- Voltage Source Inverter Multilevel-Fuseless;IGCTs,w/o parallel/series connected device
- output voltage
- Standard 6.0-6.9 kV; Optional 4.16 kV
- cooling options
- Redundant cooling fan (air-cooled ACS 5000) and pump (water-cooled ACS 5000) for enhanced reliability
- fieldbus options
- All common field buses including Profibus, Modbus, Allen-Bradley DeviceNet, Ethernet, ABB Advant Fieldbus AF100 (others on request)
- output frequency
- 0 to +/-75 Hz, up to +/-250 Hz optional (higher on request)
- software options
- ABB DriveMonitorTM for remote monitoring and diagnostics
- supported motors
- Induction, synchronous and permanent magnet motors
- auxiliary voltage
- Common 380-480 VAC, 3-phase, 50 Hz/60 Hz, (up to 690 VAC for water cooled drives)
- enclosure classes
- IP 21 air cooled; IP 32 water cooled(standard)/ up to IP 42 air cooled; up to IP 54 water cooled(optional)
- voltage variation
- +/-20% of nominal voltage (optionally up to +40%), down to-30% safe operation with derated output
- input power factor
- Fundamental Greater Than 0.96; Total Greater Than 0.95
- ambient temperature
- +1° C to 40° C (higher with derating)/34° F to 104° F (higher with derating)
- compliant standards
- All common standards including EN, IEC, CE
- motor supervision i os
- Fault/alarm: overtemperature, a vibration of bearings
- efficiency of converter
- Typically Greater Than 98.5% (incl. auxiliaries)
- transformer supervision i os
- : Fault/alarm: overtemperature, Buchholz
- standard protection functions
- +/-20% of nominal voltage (upto +40% optional), down to -30% safe operation,derated output
- synchronous bypass functionality
- for starting of up to six different motors
- ups uninterruptible power supply
- UPS can be used for control power supply,110-240 VAC 1ph or 110/220 VDC.
- hardwired signals for remote drive control
- References: start/stop, speed/torque, etc.
- integrated transformer input voltage range
- −−6.0–6.9 kV, 50 Hz/60 Hz
Add Quantity
Response within 4 hoursFree to enquire
Description
DescriptionAmbient temperature+1° C to 40° C (higher with derating)/34° F to 104° F (higher with derating)Enclosure classesIP 21 air cooled; IP 32 water cooled(standard)/ up to IP 42 air cooled; up to IP 54 water cooled(optional)Standard protection functionsOverload, stall protectionCompliant StandardsAll common standards including EN, IEC, CEOptions/Add-onsFieldbus OptionsAll common field buses including Profibus, Modbus, Allen-Bradley DeviceNet, Ethernet, ABB Advant Fieldbus AF100 (others on request)I/O OptionsMotor supervision I/OsFault/alarm: overtemperature, a vibration of bearingsPT 100: winding and bearing temperaturesTransformer supervision I/Os:Fault/alarm: overtemperature, BuchholzPT 100: winding temperaturesHardwired signals for remote drive controlReferences: start/stop, speed/torque, etc.Status feedback signals: ready/runningAnalog signals: current/voltage/power, etc.Cooling OptionsRedundant cooling fan (air-cooled ACS 5000) and pump (water-cooled ACS 5000) for enhanced reliabilitySynchronous bypass functionalityfor starting of up to six different motorsSoftware OptionsABB DriveMonitorTM for remote monitoring and diagnosticsIntegrated transformer, input voltage range−−6.0–6.9 kV, 50 Hz/60 Hz−− 10.0–11.0 kV, 50 Hz/60 Hz−−11.0–13.8 kV, 50 Hz/60 Hz on demandAdditional Features: High reliability due to low parts countOptimal network friendliness due to 36-pulse configurationModular design for optimum configurations and easy front access to drive componentsHigh level of personal safety and drive availability due to superior arc protection by ABB's Arc Guard SystemLow cost of ownership due to high efficiency and simplified installation, commissioning and maintenanceFast and accurate control performance due to DTCSuitable for standard induction, synchronous and permanent magnet motorsInstead of power fuses the ACS 5000 uses IGCTs/ thyristors, which provide faster and more reliable protection for the power components.the ACS 5000 is available for connection to an external input isolation transformer or with an integrated input isolation transformer.DriveMonitor provides monitoring access to the drive even from remote locations.DriveOPC is a software package, which allows communication between ABB drives and the customer's Windows-based applications options of all major Fieldbus adapters for the smooth integration, monitoring and controlling of different processesThe cooling equipment is available with redundant fans or pumps
Verify supplier credentials before transacting. Enquiries create leads for the supplier.