Monocrystalline Solar Panel, 550 Watt

Type: Grid-Tied (Ongrid) Application: Rooftop (Residential / Commercial / Institutional) Subsidy: As per MNRE Phase-II Rooftop Solar Programme Capacity Range Eligible for Subsidy: 1 kW to 10 kW (residential); up to 500 kW (institutional without subsidy) 🔧 Technical Specifications: 1. Solar PV Modules: Type: Mono / Mono PERC / Half-cut Mono PERC (preferred for higher efficiency) Wattage: 500 Wp and above per panel (commonly used) Efficiency: ≥ 19% Standards: IEC 61215 / 61730 certified, ALMM listed (Approved List of Models & Manufacturers) Warranty: 10 years product, 25 years performance (≥ 80% efficiency at 25 years) 2. On-Grid Inverter: Type: MPPT-based String Inverter / Microinverter Output: 230V (Single Phase) or 415V (Three Phase) AC, 50 Hz Efficiency: ≥ 95% Protection: Anti-islanding, DC/AC surge, short circuit, over/under voltage Communication: Wi-Fi/GPRS enabled for remote monitoring Standards: IEC 62109 / IEC 61727 / IEC 61683 Warranty: Minimum 5 years 3. Mounting Structure: Material: Hot Dip Galvanized MS / Aluminium Alloy Tilt Angle: Site specific (Fixed or Adjustable: 15°–30° typical) Wind Load Resistance: Up to 150 km/h Corrosion Resistance: Yes, for 25-year outdoor use 4. Cables and Wiring: Type: UV resistant XLPE / FRLS Solar Cables Voltage Rating: ≥ 1000V DC Standards: IEC 60227 / 60502 Connectors: MC4 type or equivalent 5. AC & DC Protection: DCDB (DC Distribution Box) with MCB, SPD, Fuses ACDB (AC Distribution Box) with MCB, SPD, Isolator Earthing & Lightning Arrestor as per BIS/MNRE norms 2 Nos. of Earthing (PV & LA) per system 6. Net Metering: BIDirectional Meter approved by DISCOM CT/PT installation if required for loads >10kW Online Monitoring through DISCOM portal or OEM platform 🧾 Documentation for Subsidy: KYC Documents (Aadhar, PAN) Property proof / Electricity bill System commissioning report Installation photos (as per MNRE guidelines) Vendor invoice & warranty certificates Net meter installation certificate from DISCOM 📐 Typical Rooftop Area Requirement: 1 kW system: ~100 sq.ft (shadow-free) 5 kW system: ~500 sq.ft 10 kW system: ~900–1000 sq.ft 💰 Subsidy Structure (2024-2025 MNRE Guidelines): Residential Users (Individual Households): Up to 3 kW: ₹14,588 per kW 3 to 10 kW: ₹14,588 per kW for first 3 kW + ₹7,291 per kW thereafter Above 10 kW: No subsidy beyond 10 kW Note: Final amount credited post installation, approval and documentation. 🛠️ Other Considerations: Installation by MNRE-empanelled vendors System must be ALMM compliant Net metering subject to DISCOM approval