Tubular Furnace

Specification:- Type Tube Furnace Continue Operating Temp 1000℃ Heating Element Kanthal “A-1” Wire in Coil Form Insulation Ø First layer: 1430℃ ceramic fiber board& Zirconia Fiber Blanket. Ø Second layer: 1260℃ ceramic fiber board & Zirconia Fiber Blanket. Ø High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure A Good Uniformity Temperature Accuracy ±1℃ Thermocouple K type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube Temperature Controller Ø PID automatic control via SSR power control with phase angle fired, current limiting resistor. Ø 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time. Ø Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Split Tube Furnace 1200 type. Over temperature protection and alarm allows for operation without attendant Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 5℃/Min (Suggest 3℃/Min For Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification Ø NSIC Regd, ISO 9001 – 2015/14001-2015/13485-2016/FDA/GMP/CE Certified Furnace Shell High Quality GI Sheet With PP Powder Coated Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Alumina / Alumina Bot/Gas Bubbler Warranty Ø One-year limited warranty for this Split Tube Furnace 1200 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products) ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty. Using Attentions Ø The cooling rate of this Split Tube Furnace 1200 type shall also not exceed 8℃ /min. Ø Toxic or explosive gases are not recommended for use with this Split Tube Furnace without necessary safety controls and supervision. Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence Model Hot Zone Length 1 Power Supply HE-STF-1100P 400 mm 220 V/ 5 KW Single Phase Accessories :- A) Quartz Tubes (for up to 1200°C application)(1 No.) Imported quartz tubes can be transparent or milky white. Transparent quartz tubes can withstand up to 1100 Degree Centigrade temperature. Quartz tubes can withstand very high thermal shock (1100 Degree Centigrade to Room Temperature). Quartz tubes can withstand vacuum up to 10(-3) Quartz Tube Size: (OD 60 mm /ID 55 mm/ Length 1200 mm) All dimensions are in mm. Tolerance up to 24mm OD: +/- 0.2 mm in OD and ID. Tolerance beyond 24mm OD to 60 mm OD: +/- 0.5 mm in OD and ID Tolerance beyond 55 mm OD: +/- 1.5 mm in OD and ID B) Rotameter –Acrylic body 6”to8” long (1 No.) Range: 50CCM to 500CCM, Gas: ArgonInlet/Outlet connector – Horse OR Ferrule OR fitting. C) Aluminium Flange: - Aluminium Flanges with Silicon O – Ring & Vacuum Gauge for Vacuum or Gas purging application Harrier Offer matching Aluminium flanges. These flanges are made as per tube dimension to avoid any leakage of vacuum or gas during application. All Dimensions are in mm. Inner Diameter 60.5 mm Tolerance beyond 24 mm OD to 70 mm OD: ± 0.5 to 1 mm in OD and ID