Stability Test Chamber

Stability Test Chamber made Of Mild Steel Sheet Powder Coated, PUF Insulated, The Unit Has Inner Plexiglass Door And Outside Metal Door With Magnetic Gasket, Lock & Key, Perforated Stainless Steel Trays, Caster Wheels For Mobility. Inside Chamber Fitted With Blower To Motor. Fitted With Microprocessor Based PID Controller For Temperature And Humidity. The Cooling System Consists Of Hermetically Sealed Compressor. Temperature Range: 10 Degree C to 60 degree C (Accuracy: 0.2o C) Humidity Range: 40% to 95% RH (Accuracy: 1%) Accurate Micro processor Based Humidity Control System: The LABSOL” Stability Chamber uses a microprocessor based; electronic humidity sensor detector is an exact logarithmic function of the humidity concentration in the environment of the chamber between source and detector. Illumination: Our photo stability chamber conforms to the illumination requirement as per the International Conference on Harmonization of Technical Requirements for Registration of Pharmaceuticals for Human Use. Insulation: The gap of 75 mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Mineral Glass Wool Insulation: Glass mineral wool is one of the most environmentally friendly, stable and sustainable insulants available. Glass wool is incombustible by nature. Euro class classification is A. Air circulation: Triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber Features of Coaxial Circulation Fan: Vacuum impregnated stator winding with dr. back varnish under red baktol Non-hygroscopic Best IR value Bright bar (EN - 8 class) shaft Bush bearing of branded companies Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator Pressure die-casted-rotor manufactured with zero error Boats of high accuracy Specifications: MODEL NO W x H x D Capacity LBS-STC-6 505 x 830 x 415 mm 6 Cu.ft LBS-STC-10 570 x 875 x 550 mm 10 Cu.ft LBS-STC-12 650 x 900 x 550 mm 12 Cu.ft LBS-STC-15 700 x 900 x 650 mm 15 Cu.ft LBS-STC-20 775 x 900 x 775 mm 20 Cu.ft LBS-STC-30 825 x 1200 x 825 mm 30 Cu.ft LBS-STC-45 900 x 1720 x 800 mm 45 Cu.ft