Stainless Steel Doors

Material Door Frames And Leaves Are Made From Stainless Steel � Grade 304 Hair Line Finish. Door Leaves Constructed From 0.80mm Thick Stainless Steel Sheet Press Formed To Provide A 46mm Thick Fully Flush, Double Skin Door Shell With Lock Seam Joints At Stile Edges. In-fill Of Honeycomb Kraft Paper Is Used To Give The Required Rigidity And Effective Acoustic Insulation. Door Frames Produced From 1.20mm (18g) Thick Stainless Steel Sheet Formed To Single Rebate Profile Of Size 100mm X 58 Mm. The Door Frames May Be Built Into The Brick Or Block Walls Using Corrugated �tee� Anchors Not Welded To The Frames (first Fix). Frames May Also Be Fixed On Plastered Openings With The Help Of Anchor Fasteners (second Fix). Door Frames Are Supplied To Knockdown/welded From With Butt Joints For Bolted Assembly At Site. Vision Glass Vision Glass With 5 Mm Clear Float Glass Can Be Provided In Circular, Square Or Rectangular. The Circular Vision Glass Can Be Provided In 380 Mm Dia Only, Standard Rectangular Sizes 300 Mm X 500mm, 450mm X 750mm Amp; 350mm X 750mm. Limitations On Vision Glass (for Non Standard Sizes): Height Not Exceeding 1550mm, Width To At Least 300mm Less Than That Of The Shutter Width Louvers Factory Finished And Fixed Metal Louvers (single Proof) Can Be Provided In Square / Rectangular Sizes. Finish The Doorframes And Door Shutters Are Of Stainless Steel � Grade 304hair Line Finish. Ironmongery Hinge Stainless Steel Ball Bearing Butt Hinges 3 Mm Thick Fixed Flush To The Frame And Shutter (profile 102 X 76 X 3mm Thick) Lock Mortise Sash Lock With Lever Handles, Mortise Dead Bolt, Mortise Latch, Panic Devices Etc Can Be Provided As Required. Flush Bolts (double Door) Concealed Extended Lever Action Flush Bolts Provided On The Top Of The Door To The Leading Stile Edge. Door Closers Doors Are Made Suitable To Receive A Large Variety Of Doors Closers. Options Door Coordinator, Smoke Seals For Air Tightness, Automatic Door Bottoms Etc., Can Be Provided If Required.