Unstrip 999 Cutting And Stripping Machine

Overview The powerful Unistrip-999 processes round cables upto 8 mm outer dia. And processes 2 core, 3 core flat and round cables with pull-off lengths upto 100 mm on the right end (leading end) and 40 mm on the left end (trailing end). This Unistrip-999 has a powerful cutting and transport drives for higher production rates. It has a program memory capacity of upto 200 wires with all the processing parameters. This Unistrip-999 is designed in PLC based with servo motors and HMI Features: Quick change guide tubes and blades Simple operation of HMI (TFT Touch Screen) User-friendly operation Quick programming Mid-strip facility available (optional) Advantages Stripping lengths – Partial strip Stripping lengths - Full strip Can strip single core as well as multi-core cables Mid-strip facility for small cables Inch mode option to set the blades as per cables Step run option to trace the problem if machine malfunctions Less Wastage Low Noise Counter Option Foot Pedal operation for operator convenience No wire signal with machine stop option Auto start delay facility to run in continuous production Details: Cycle Time: Approx 1 sec Power Supply: 230 to 240V (50/60 Hz) (optional 110V) Power requirement: 1.2 KW Dimensions (L x W x H): 550 x 400 x 430 mm (21.6 x 15.7 x16.9 inches) Net Weight: 45 kgs Running Options: Step mode, Test, Single and Run mode Feed Rate: 10 to 100 % (500 mm to 1500 mm) (19.6 to 59.0 inches) Blades: HSS / Carbide PRODUCTIVITY CHART OF UNISTRIP-999 WIRE SIZE DESCRIPTIONS QTY / HOUR 0.5 to 1.0 sq mm (3 wires) Both Side Stripping 10000 1.5 to 2.5 sq mm (2 wires) Both Side Stripping 6000 4.0 to 8.0 sq mm (1 wire) Both Side Stripping 3000 2 core and 3 core cutting & stripping Both Side Stripping 1000 (At 2 meters length)