Dr.fixit Zinc Rich Primer, 20 L

F O R C AT H O DI C P R O T E C T I O N T O R E - B A R S & S T EEL SU R - FA C ES Dr. Fixit Epoxy Zinc Primer Description Dr. Fixit Epoxy Zinc Primer is a two-component system based on metallic Zinc and epoxy resin, hardener & additives which on mixing gives a grey coloured liquid. Dr. Fixit Epoxy Zinc Primer is recommended for coating on steel reinforcement or steel surfaces as an anti corrosion primer. The product actively resists corrosion within the confines of the repair location and avoids the generation of incipient anodes in immediately adjacent locations. Areas of Application For coating of re-bars and steel surfaces. Features & Benefits } Passivation - Active zinc-rich system combats corrosion by electro chemicals means. } Ease of application – Easy to mix & applicable by brush or spray. } Time saving – Saves time because it dries quickly (touch dry time 15 to 45 minutes). } Compatibility – Excellent compatibility and suitable primer for steel surfaces and can be over coated by epoxy or polyurethane coatings. } Bonding – Bonds strongly to cement concrete & mortars. } Chemical resistance – Resistance to commonly used acids & alkali. Method of Application 1 SURFACE PREPARATION } Expose fully any corroded steel in the repair area and remove all loose scale and corrosion deposits. Care should be taken to clean the back side of exposed steel bars as well. Grit blasting is recommended for this purpose. } The application of Dr. Fixit Epoxy Zinc Primer must take place immediately on a dry steel surface after completion of the preparation work and not later than three hours.