Yellow PEEK High Temperature Wires, Multi Core

We offer PEEK Insulated High Temperature Copper WiresSpecificationSizes:Φ0.2-Φ5mm The following is the general high voltage resistance of PEEK Wire/PEEK Cable: Low diameter wire (e.g. 0.10 mm): can withstand high voltages ranging from hundreds to thousands of volts. Medium diameter wire (e.g. 0.50 mm): can withstand high voltages of 5,000 volts or more. Large diameter wire (e.g. 1.00 mm and above): can withstand high voltages above 10,000 volts. PEEK MAGNET WIRE PROPERTIES Property PEEK WIRE Electrical Properties Electrical Insulation Excellent Dielectric Strength Superior,dielectric strength is 20-24 kV/mm Secondary Insulation with excellent electrical insulation performance and low dielectric loss Electrical Strength High tensile strength and excellent mechanical properties Mechanical Properties Adhesion Maintains over 91% even after 2000 hours at 150°C in ATF Viscosity and Temperature Change Stable at high temperatures Strength Constantexpansion rate Expansion Rate Low thermal expansion coefficient, ensuring dimensional stability within the temperature range Speed Achieves high-speed processing due to good thermal stability and mechanical strength Environmental Adaptability Thermal Stability Up to 240°C Chemical Resistance Excellent Thermal Conductivity Thermalconductivity coefficient is 0.35 W/m·K Tg (Glass Transition Temperature) Approximately143°C, indicating high-temperature stability Glass Transition Temperature -40°C to 130°C Environmental Friendliness Does not contain volatile organic compounds (VOCs) or carcinogens Special Application Properties Applicable Scenarios Electric vehicles, high-voltage motors, harsh environments, and high-temperature applications Special Properties Resistant to ATF fluid and vapor, suitable for scenarios requiring high adhesion and strength Curing Characteristics Precise control of curing conditions is required to ensure uniform insulation Adhesion Analysis Ensures reliable performance under mechanical stress due to strong molecular adhesion Peak Coating Wires Provides durable coatings suitable for high-performance applications Copper Slot Fill Volume Due to the superior properties of PEEK, the insulation layer is thinner, resulting in a higher fill volume Other Properties Resin Absorption in Windings Fast absorption due to low viscosity at processing temperatures Thermal Expansion Coefficient 48 ppm (low temperature) to 208 ppm (high temperature)