MAX6675 Module K Type Thermocouple Sensor Measure 1024 C Temperature

QUICK OVERVIEW Internal integrated cold junction compensation circuit;With a simple three serial SPI interface;Temperature signal can be converted into 12-bit digitalEmbedded thermocouple break detection circuitry.High impedance differential inputs.Operating Voltage(VDC): 3 to 5.5Temperature Range(°C): 0 to +1024Cold Junction Compensation Range(°C): -20 to +80 This MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature sensor makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) for giving an accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12-bit resolution providing temperature readings from 0°C to 1024°C (max temperature of the supplied sensor is 450°C) with a resolution of 0.25°C. Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1″ header provides an interface to a microcontroller such as an Arduino development board. Supplied thermocouple sensor has a diameter of 4.5mm with a 6mm threaded mounting bolt. The total length of the sensor including cable and spade connectors is ~100cm. Internal integrated cold junction compensation circuit;Temperature signal can be converted into 12-bit digitalEmbedded thermocouple break detection circuitry.K-type temperature probeSimple SPI serial output temperature.High impedance differential inputs.Thermocouple break detection.2000V of ESD signal.