C15-400B P Audio Speaker, 400 W
₹7,800.00
Specification
- size
- 15 inch
- brand
- P Audio
- color
- Black
- power
- 400 W
- usage
- DJ System
- x max
- 3.25 mm/0.13 in
- gap depth
- 12 mm/0.47 in
- net weight
- 10.1 kg/22.3 lb
- suspension
- Single
- magnet type
- Ferrite
- sensitivity
- 97 dB
- availability
- In Stock
- chassis type
- Cast Aluminum
- nbsp nbsp bi
- 15.55 Tm
- nbsp nbsp fs
- 42 Hz
- nbsp nbsp re
- 5.4Ω
- nbsp nbsp sd
- 855 cm2
- coil material
- AL-W
- cone material
- Paper
- magnet weight
- 2.74 kg/96.6 oz
- nbsp nbsp cms
- 1.4e-04 m/N
- nbsp nbsp mmd
- 88.60 g/3.13 oz
- nbsp nbsp mms
- 102.98 g/3.63 oz
- nbsp nbsp qes
- 0.61
- nbsp nbsp qms
- 5.09
- nbsp nbsp qts
- 0.55
- nbsp nbsp rms
- 5.40 Ns/m
- nbsp nbsp vas
- 141.96 lt/5.01 ft3
- former material
- Glass fiber
- frequency range
- 55-2000 Hz
- shipping weight
- 11.3 kg/24.9 lb
- nominal diameter
- 381 mm/15 in
- model name number
- C15-400B
- nominal impedance
- 8 Ohm
- packing dimension
- 23 cm
- surround material
- Cloth
- voice coil diameter
- 75.7 mm/3.0 in
- nbsp nbsp le at 1khz
- 0.35 mH
- voice coil winding width
- 1.85 cm
Add Quantity
Response within 4 hoursFree to enquire
Description
C15-400B P Audio Speaker is a high performance wide bandwidth transducer. The C15-400B is an upgraded design that features many of P.Audio's new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-400B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz.The C15-400B features a large 3 inch (75.7mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-400B utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.The voice coil design is a bobbin wound geometry with P.Audio's inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling.The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.Features: 3" Voice Coil 1600 Watts Peak Power Handling Active Balanced Cooling Ferrite Magnetics Precision Inside/Outside coil Geometry Die Cast Aluminum Chassis SMALL SIGNAL PARAMETERS Re 5.4Ω Fs 42 Hz Mms 102.98 g/3.63 oz Mmd 88.60 g/3.13 oz Qms 5.09 Qes 0.61 Qts 0.55 Vas 141.96 lt/5.01 ft3 SD 855 cm2 BI 15.55 Tm Cms 1.4e-04 m/N Rms 5.40 Ns/m Le (at 1kHz) 0.35 mH
Verify supplier credentials before transacting. Enquiries create leads for the supplier.