Foster Vertical Turret Milling Machine
₹6,50,000.00
Specification
- brand
- Fostex
- model
- 2KS
- power
- 2.2 kw
- net weight
- 1154.8656 kg
- ram travel
- 390 mm (15.354 inch)
- table size
- 230x1067 mm (9x42 inch)
- cross table
- 305 mm (12.007 inch)
- hand swivel
- +/- 45 Degree
- quill feeds
- 0.14 (0.0015-0.006 inch) mm/min
- overall depth
- 1618 mm
- overall width
- 149.7 cm
- spindle motor
- 2HP
- spindle taper
- NT 30
- overall height
- 210.5 cm
- digital readout
- Yes
- z axis guide way
- Linear
- spindle to column
- 154-544 (6-21.4 inch)
- number of power feed
- 1
- spindle quill travel
- 175 mm (5 inch)
- over swivel on turret
- +/- 90 Degree
- spindle to table nose
- 360 Degree
- low range spindle speed
- 2310 rpm
- high range spindle speed
- 4620 rpm
- t slot of table qty x size
- 3x16 mm (3x0.629 inch)
- z axis vertical travel of knee
- 406 mm (15.984 inch)
- longitudinal travel with power feed
- 682 mm (26.85 inch)
- longitudinal travel without power feed
- 762 mm (30 inch)
Add Quantity
Response within 4 hoursFree to enquire
Description
Features: Induction hardened and ground X and Y slideways Turcite B on X and Y Slideways and jibs Grinding on Slideways of column Table Top hardened and ground Chrome Molybdenum alloy steel spindle hardened and ground Hardened and ground spindle gear, back gear 8 clutch gear Splined quill Pinion shaft supports the feed clutch. Three power quill feeds with auto stop PBC-2, Hard - wearing Phosphor Bronze double nuts for leadscrews Spiral bevel gears for lifting screw. Coolant tank in base. Standard Accessories: Draw Bar : for R13-M12x1.5; for NT30-M12 x 1.75; for NT40- M16X2.0 Tools and Tool Box Hand operated Lubrication pump Rubber chip cover Font and Rear Spare parts & Operation Manual Machine Lamp Electric Panel Optional Accessories: Table Power Feed (Electric or gear box type)Coolant System Base splash guard Quartz work light Automatic lubrication Lifting motor lor 2S/2V,4S/4V,5S/5VBall screw on X 8Y axis NST# 40 spindle (25/2V,4S/4V) Clamping Kit Collet chuck (NST#30/R8/NST#40) Milling Vise (Angle-lock/ Hydraulic) Horizontal Milling Attachment DRO System Power Draw bar (Air or Electric)
Verify supplier credentials before transacting. Enquiries create leads for the supplier.