SS 316 & SS 304 V Blender, For Mixing

The material is loaded into the blender. The recommended fill-up volume for the V-Blender is 50 to 60% of the total blender volume. On rotation, a tumbling motion occurs. When the V-Blender tumbles, the material divides and recombines continuously. The repetitive converging and diverging movement between the material and the blender results in homogenous blending. The product is collected from the bottom of V. Normal blend times are typically in the range of 5 to 15 minutes depending on the properties of a material to be blended. Blender speed can also be key to mixing efficiency. At low speeds, shear forces are less. Although higher mixing speeds provide more shear, this can lead to greater dust resulting from the segregation of fines. There is also a critical speed that, if approached, will considerably reduce the mixing efficiency. As revolutions per minute increase, the centrifugal forces at the extreme points of the blender will exceed the gravitational forces required for mixing. As a result, the powder must tend to gravitate toward the outer walls of the blender casing. As the size of the blender increases, the rotational speed generally decreases in proportion to the peripheral speed of the blender extreme. V-Blenders are designed to operate between 50% and 80% of the critical speed. Additional Information Delivery Time 30 to 40 Days Production Capacity 10 to 1000 Liters Packaging Details In Our Scope with Wooden Box