DR 123 Vertical Laboratory Autoclave

In order to cater the variegated demands of our clients, we are offering an excellent quality range of DR 123 Vertical Laboratory Autoclave .Description: The outer chamber is made of heavy gauge Stainless Steel sheet duly polished. The inner chamber is made of thick 304 Grade Stainless Steel Sof thick machined high grade Stainless Steel Sheet. The unit has Wing Nut type locking arrangement. Unit is provided with Spring Loaded Safety Valve, Pressure Guage. Pressure Release Valve, Water Level indicator & Drain Valve. Unit is hydraulically tested to withstand upto 40 psi pressure. All internal joints are Argon arc welded, ground and polished to give crevice free internals. Molded joint-less Silicon Rubber Gasket is provided for leak proofing. The unit is electrically heated by flange type / immersion type heaters. Supplied with Control Box, fitted with Mains & Heating Indicators. Rocker Switch, Cord & Plug to work on 220/230V, 50Hz AC supply. Optional Accessories: Automatic Pressure Control Switch Automatic Low Water Cut Off Device Digital Temp. Indicator Cum Controller Timer With Alarm System Model Wing-35 Wing-52 Wing-75 Wings-95 Wing-178 Inner Dimensions (Dia x Depth) in mm in Inches 300x500 12x20 350x550 14x22 400x600 16x24 450x600 18x24 550x750 22x30 Capacity Approx 35 Ltr 52 Ltr 75 Ltr 95 Ltr 178 Heater Load 2.0 KW 3.0 KW 4.0 KW 4.0 KW 5.0 KW Sterlizing Pressure 1.2 kgf/cm2(15 psi) at 121 Degre C Pressure Gauge 0-2.1 kgf /cm2(30 psi Operating Pressure up to 20 psi Basket Stainless Steel ( Perforated / Wire Mesh Power Supply 220 volts 50 Hz AC