Computerized Brinell Hardness Testing Machine, HB, Model Name/Number: B-3000-PC

Features:Fully computerised system for indentation measurement and display.Accurate measurement of Brinell Hardness through matched Optics, CCD Camera, Hardware and Software using advanced image processing technology.Wide range of testing to IS 2281-1983.Hydraulically loading / unloading system provided with load/unload button for Operation.Windows based software system.Three modes of measurement, Manual, Auto & Semi-auto.In auto mode the image is scanned for measurement and hardness is displayed automatically.In semiautomatic mode user can click on indentation image & hardness is automatically displayed.In manual mode user can measure diameter directly from the image.Macro and Micro adjustment facility provided in manual mode for fast accurate encircling of the image to be measured.Calibration mode is provided with password protection.Batch testing facility is provided.Description:B-3000 PC Computerised Brinell Hardness Tester has a C Type load frame. The Job is positioned o the test table and lifted by the hand wheel to touch the support plate. Required load is applied on the job and removed by operating Load/Unload knob provided on machine at the bottom side of load frame. The timely indexing of Indentor is automatic.On removal of load the optics will transfer the image of indentation to CCD. The image is further digitalized and processed by PC for measurement. The diameter of the image can be measured Automatically/manually to give the Brinell hardness value.Technical SpecificationTest Loads 500,750,1000 & 3000 kgf.Automatic load selection & application (Optional).Max. test height 360 mm (approx).Depth of throat 200 mm.Size of base 390x910 mm (approx).Machine Height 1230 mm (approx).Drive motor 0.33 H.P.Power Supply 3 Phase 400-440 V, 50 Hz. A.C. (for Machine) & 1 Phase 200-220 V, 50 Hz.A.C. (for Computer).Weight of the Machine 230 Kg (Approx.).Indentors 5 mm and 10 mm dia.Standard AccessoriesTesting Machine dia 200 mm 1 No.Testing Table dia 70mm with V groove for round jobs, 10 mm to 80 mm dia. -1 No.Ball holder 5 mm -1 No.Ball holder 10 mm -1 No.Test Block HB 5/750 -1 No.Test Block HB 10/3000 -1 No.Steel balls 5 mm and 10 mm dia. -5 Nos. eachAllen Spanner-1 set.Instruction manual-1 Book.Printer (Extra Accessories).The test report consists of Machine, Sample and test detail along with.Mean diameterBrinell hardness valueBitmap imageLow/High limits of acceptance and accept or reject status.Note: Special attachment for specific test requirement can also be supplied.• PC & Printer is not in our standard scope of supply