Ecoxydizer Plus Plus Biocide Liquid for ETP/STP/CETP/Sludge Treatment (25 L)

In the 1950's the biocidal capability of Ecoxydizer, especially at high pH values, was known. For drinking water treatment it was primary used to remove inorganic components, for example manganese and iron, to remove tastes and odors and to reduce chlorine related disinfection byproducts. For drinking water treatment Ecoxydizer can be used both as a disinfectant and as an oxidizing agent. It can be used for both pre-oxidation and post-oxidation steps. By adding Ecoxydizer in the pre- oxidation stage of surface water treatment, the growth of algae and bacteria can be prevented in the following stages. Ecoxydizer oxidizes floating particles and aids the coagulation process and the removal of turbidity from water. Ecoxydizer prevents the growth of bacteria in the drinking water distribution network. It is also active against the formation of bio film in the distribution network. Bio film is usually hard to defeat. It forms a protective layer over pathogenic microorganisms. Most disinfectants cannot reach those protected pathogens. However, Ecoxydizer removes bio films and kills pathogenic microorganisms. Ecoxydizer also prevent bio film formation, because it remains active in the system for a long time.