Starproof Wf Sp 600 Waterproofing, 20 kg

Starproof WF-SP 600 is a liquid waterproofing coating/membrane based on special synthetic resin. It's a single-pack, water-based waterproofing product that cures to form a protective barrier against moisture and water ingress. �� Main Uses This waterproof coating is typically used for: Roof slabs, terraces, balconies, sunshades, parapet walls Flat and sloped roofs (concrete, asphalt, cement, asbestos, terrazzo tiles) Both horizontal and vertical surfaces New and old surfaces needing waterproof protection �� Key Features & Benefits Excellent flexibility and thixotropic nature — meaning it stays where applied without sagging easily. UV resistant (white color helps reflect sunlight and reduce surface heat). Pollution-free and economical waterproof membrane. Single component — no complicated mixing needed. �� Technical Highlights (Approx) From available product datasheets: Form: Viscous liquid (paste) Color: White (also grey/blue in some batches) UV resistance: ~10,000 hrs with no deterioration/fade Elongation at break: >350 % (very flexible) Water permeability: Almost zero after curing Dry film thickness: ~450–500 µm in two coats Coverage: ~13–15 sq ft/kg for two coats (varies by surface) ⚠️ Important application notes: Clean and prime surfaces before applying. Avoid application when rain is imminent or at very low temperatures. It's best when two coats are applied and allowed to cure (~48 hrs at normal temps) before any traffic or covering. �� Packaging & Storage Commonly supplied in 1 kg, 5 kg, 10 kg and 20 kg (or 20 L) containers. Shelf life: ~12 months in unopened containers, store away from direct sunlight and extreme heat.